Aquaex Supreme Exterior Emulsion is specially designed to withstand extreme weather conditions with superior anti-fungal and anti-algae properties.
Shake well before use
Brush, Roller & Spray
Water
40 - 50% by Volume
Seal cracks with a 1:3 mixture of cement and sand. Use of Polymer Putty is highly recommended. Allow 3 months curing prior to painting for newly plastered surfaces. Apply 1 coat of Euro Exterior Wall Primer, obtained by thining 1 litre of primer with 1 litre of water.
Surface Dry in 30 Min.
Temprature: 10-40 Degree
Humidity: Below 80%
Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation.
Euro Polymer Putty or Acrylic Wall Putty
Non-flammable No added Lead, Mercury or Chromium compounds
Apply 2 coats of Aquaex Supreme Emulsion, obtained by thinning 1 L of emulsion with 400-500 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc.
Technical Data | |
---|---|
Appearance | Smooth, Liquid, White |
Coverage | 1st Coat: 9 - 11 sqm/kg* 2nd Coat: 8 - 10 sqm/kg* |
Contrast ratio | 98.5 |
Drying Time | 4-5 Hrs |
Flash Point | NA |
Pot life | 24 hrs |
Recommended DFT | NA |
Sheen Level | 2.2 at 60 degree |
Stability of thinned paint | 24 Hrs |
Solids | 61 |
Specific gravity | 1.3 to 1.49 |
Shelf life | 24 months |
Viscosity @25° C by Stormer Viscometer | 1900 CP |
Application Details & Surface Preparation