COREPRIME ACRYLIC BASE COAT is an excellent water soluble cement primer for coating over masonry walls, concrete surfaces, asbestos sheets, and cement plastered brick walls before any paint application to create a good adhesive surface. A good primer servers as a backbone of the paint for retaining it on the walls for a long time. COREPRIME ACRYLIC BASE COAT is made using Acrylic Emulsion and very fine extenders and additives to get a smooth uniform surface and has a property of deep penetration and sealing of porous surfaces. It is available in 1 It. , 4 It., 10 It. & 20
Performance Features & Benefits
- Easy to apply
- Economical
- Packs available 1L, 4L, 10 L, 20 L
- Surfaces Cement plasters, Asbestos sheets, Concrete, Brickwork, etc
- Washability NO
- Recommended Uses Area Interior
- Post Application Instructions Apply Interior Emulsion on Primer
- Finish MATT
- Method of application NA
- Shades available
White
- Other Product Related Features NA
- Precautions Do not leave primer without application of top coat
Mixing
Shake well before use
Tools
Brush
Thinning
water
Thinning Ratio
100% by Volume
Surface Preparation
NA
Drying Time
Surface Dry in 30 Min.
Application Environment
Temperature: 10-40 Degree
Humidity: Below 80%
Cleaning
Remove all dust, dirt, chalking, oil, grease, loose particles and all other contamination. Any previous growth of fungus, algee should be removed by wire mesh and clean with water.
Filling
Polymer Putty or Acrylic Wall Putty
Safety Features
Non- flammable No added Lead, Mercury or Chromium compounds
Application
Apply 1-2 coats depending on surface condition.
| Technical Data | |
|---|---|
| Appearance | Smooth, Liquid, White |
| Coverage | 1 Coat: 7- 10 sqm/L* |
| Contrast ratio | 88.5 |
| Drying Time | 4-5Hrs |
| Flash Point | NA |
| Pot life | 24 hrs |
| Recommended DFT | NA |
| Sheen Level | 1.8 at 60 deg |
| Stability of thinned paint | 24 Hrs |
| Solids | 47.3 |
| Specific gravity | 1.4 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 2400 CP |
Application Details & Surface Preparation