Durashine Luxury Interior Emulsion is a high opacity Interior Emulsionfinish with rich sheen. It is based on pure acrylic emulsion with exceptional flexibility and easy cleaning properties to remove tough stains.
Performance Features & Benefits
- Rich Smooth Finish
- Superior Washability
- High stain resistance
- Low odour
- Fungus & mildew resistant
- Packs available 1 L, 4 L, 10 L, 20 L
- Surfaces Cement plasters, Asbestos sheets, Concrete, Brickwork, etc
- Washability HIGH
- Recommended Uses Area Interior
- Post Application Instructions To remove dirt/ stains, Clean the painted surface by sponging with a mild soap solution. Allow the paint to dry for 2 weeks before cleaning
- Finish SHEEN
- Method of application NA
- Shades available
NA
- Other Product Related Features NA
- Precautions In case masking tape is being used to separate two areas while painting, it is recommended to remove all masking tape before the paint film dries completely.
Mixing
Shake well before use
Tools
Brush & Roller & Spray
Thinning
Water
Thinning Ratio
Brush Application: 40 % by Volume Roller Application: 10-15% by Volume
Surface Preparation
Allow 3 months curing prior to painting for newly plastered surfaces. Apply Europrime Cement Primer. After drying for 8 hours, fill the dents in the surface with Putty. Apply another coat of Europrime Cement primer.Allow to dry.
Drying Time
Surface Dry in 30 Min.
Application Environment
Temperature: 10-40 Degree
Humidity: Below 80%
Cleaning
Clean the surface of loose paint, dust and grease by sanding with emery paper. Wipe clean with a soft cloth.
Filling
Cement Putty or Acrylic Wall Putty
Safety Features
Non- flammable No added Lead, Mercury or Chromium compounds
Application
Apply 2-3 coats of Durashine Luxury Interior Emulsion,obtained by thinning 1 L of emulsion with 400 ml of water by brush or 150ml water by roller.Allow 4-6 hours drying time between each coat.
| Technical Data | |
|---|---|
| Appearance | Liquid |
| Coverage | 1st Coat: 14 - 16 sqm/L* 2nd Coat: 10 - 12 sqm/L* |
| Contrast ratio | NA |
| Drying Time | 4-6 hours |
| Flash Point | NA |
| Pot life | NA |
| Recommended DFT | NA |
| Sheen Level | 82 @ 85 degree |
| Stability of thinned paint | 24 Hrs |
| Solids | 58 |
| Specific gravity | 1.32 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 2200 CPS |
Application Details & Surface Preparation