Erolight Acrylic Distemper is a water based Interior paint which gives matt finish to walls.
Performance Features & Benefits
- Matt Finish
- Durable
- Packs available 1 kg, 2 kg, 5 kg, 10 kg, 20 kg
- Surfaces Plastered Walls
- Washability Low
- Recommended Uses Area Interior
- Post Application Instructions NA
- Finish MATT
- Method of application NA
- Shades available
NA
- Other Product Related Features NA
- Precautions Do not apply when the ambient temprature below 10'c.
Do not apply directly on Lime wash or White cement painted wall
Mixing
Shake well before use
Tools
Brush
Thinning
Water
Thinning Ratio
50-60% by Volume
Surface Preparation
Newly plastered surfaces should be allowed to mature for a minimum period of 6 months before painting.
Drying Time
Surface Dry in 20 Min.
Application Environment
Temperature:10-40 Degree
Humidity: Below 70%
Cleaning
Remove all loose and flaking particles, and rub with sand paper. flammable Ensure that the surface is clean Lead, Mercury or and dry.
Filling
Euro Polymer Putty or Acrylic Wall Putty
Safety Features
Non-flammable
Application
Apply one coat of Europrime Cement Primer. After filling up dents with a layer of Europlus Cement Putty, apply another coat of Europrime Cement primer. Apply 2-3 coats of Eurolight Acrylic Distemper, obtained by thinning 1kg of distemper with 500-600 ml of water.
| Technical Data | |
|---|---|
| Appearance | Semi Solid |
| Coverage | 1st Coat: 9 - 10 sqm/kg* 2nd Coat: 7 - 8 sqm/kg* |
| Contrast ratio | 99.7 |
| Drying Time | 4-6 hours |
| Flash Point | NA |
| Pot life | 24 hrs |
| Recommended DFT | NA |
| Sheen Level | 2.3 at 60 degree |
| Stability of thinned paint | NA |
| Solids | 67 |
| Specific gravity | 1.63 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 430 psi by Penetrometer |
Application Details & Surface Preparation