Europrime Ext. Wall Primer is a water-based wall coating, suitable for application on exteriors as an under coat to exterior emulsion.
Performance Features & Benefits
- Excellent opacity
- Whiteness and adhesion to top coat emulsion.
- Does not chalk and does not require any water curing
- Packs available 1 L, 4 L, 10 L, 20 L
- Surfaces Exterior cement plasters, exterior ceilings, asbestos sheets, concrete etc. as an undercoat.
- Washability MEDIUM
- Recommended Uses Area Interior / Exterior
- Post Application Instructions Apply Exterior Emulsion paint on primer
- Finish MATT
- Method of application NA
- Shades available
White
- Other Product Related Features Good opacity and whiteness
- Precautions In coastal area do not leave primer without application of top coat, do not over thin, and shake well and strain before use
Mixing
Shake Well before use
Tools
Brush
Thinning
Water
Thinning Ratio
85 - 90% by vol.
Surface Preparation
Standard surface preparation required
Drying Time
Surface Dry in 30 Min.
Application Environment
Between 5 to 40 Degree temp and below 80% humidity
Cleaning
Remove all dust, dirt, chalking, oil, grease, loose particles and all other contamination. Any previous growth of fungus and algae should be removed by wire mesh and cleaned with water. Let it dry completely. Allow it to react minimum 5-6 hrs.
Filling
Cement Putty or Acrylic Wall Putty
Safety Features
Non-flammable, no added Leard, Mercury or Chromium compounds. Refer MSDS.
| Technical Data | |
|---|---|
| Appearance | Smooth, Liquid, White |
| Coverage | 1 Coat - 8 - 10 Sqm / L* |
| Contrast ratio | 95.8 |
| Drying Time | 4-5 Hrs |
| Flash Point | NA |
| Practical Spreading Rate | - |
| Pot life | 24 hrs |
| Recommended DFT | - |
| Sheen Level | 2.0 at 60 degree |
| Stability of thinned paint | 24 Hrs |
| Solids | 52% |
| Specific gravity | 1.4 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 2345cp |
Application Details & Surface Preparation