Shinecoat is a Premium quality waterproof cement paint. its formulation results in easy mixing, excellent hiding, and excellent resistance to fungal & algal growth, Proper application of Shinecoat results in extra durability and longer life.
Performance Features & Benefits
- Good coverage & hiding
- Higher cement content for better durability
- Specially formulated using light fast pigments & water repellant chemicals.
- Packs available 5 kg , 25 kg
- Surfaces Cement plasters, Asbestos sheets, Concrete, Brickwork, etc
- Washability MEDIUM
- Recommended Uses Area Interior
- Post Application Instructions NA
- Finish MATT
- Method of application NA
- Shades available
As per Shade Card
- Other Product Related Features NA
- Precautions 1. Proper pre-welting and curing should be carried out before painting.
2. After mixing with water, the cement paint should be applied within two hours.
3. The use of white cement or any other local cement paint as a base coat is not recommended.
4. Shinecoat should not be applied on the surfaces painted with lime, oil paint and other glossy surfaces. Such surfaces must be scrapped and cleaned properly and a coat of cement primer should be used before application of Eurocem / Shinecoat.
5. Over dilution and under dilution of the paint should be avoided as doing so may result in shade variation. In former case and low coverage or flaking in the later case.
6.Shinecoat is available in powder form ready to use. No intermixing of shades or addition of other additives should be done as it affects the properties.
7. Store Shinecoat packing in a dry place and properly tied up. It may deteriorate on catching moisture from air if left open.
Mixing
Add 2 parts of Shinecoat and one part of water. Stir well using a good stirrer or with hands to get a thick creamy paste. Add another volume of water to get brushable consistency.
Tools
Brush
Thinning
Water
Thinning Ratio
100% by weight (Add water in two stages. First 50% till thick paste is formed, followed by balance.)
Surface Preparation
Allow 3 months curing prior to painting for newly plastered surfaces.Sprinkle the surface with water.
Drying Time
Surface dry in 30 min.
Application Environment
Temperature: 10-40 Degree
Humidity: Below 80%
Cleaning
Clean the surface of loose paint, dust and grease by sanding with emery paper. Wipe clean with a soft cloth.
Filling
Europlus Putty
Safety Features
Non- flammable No added Lead, Mercury or Chromium compounds
Application
Prepare the mix as per instructions given under Mixing. Apply 2 coats of Shinecoat using brush with 8-10 hours drying between coats.Each application should be wetted aftter at least 8-10 hrs. with fine water spray depending upon climate conditions. Curing should be done with clean tap water from bottom to top direction. Properly cured cement paint forms an integral part of the surface by forming a strong bond with it and continues to harden day by day. To ensure proper setting of Shinecoat. After the second coat, spray clean water on the painted surface twice a day in hot dry weather for at least 2-3 days.
| Technical Data | |
|---|---|
| Appearance | NA |
| Coverage | 1st Coat: 2 - 3 sqm/kg* 2nd Coat: 1 - 2 sqm/kg* |
| Contrast ratio | NA |
| Drying Time | 8-10 Hrs |
| Flash Point | NA |
| Pot life | NA |
| Recommended DFT | NA |
| Sheen Level | NA |
| Stability of thinned paint | NA |
| Solids | NA |
| Specific gravity | NA |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | NA |
Application Details & Surface Preparation