Smart Acrylic Distemper for interiors is an entry level paint designed to give a smooth matt finish.
Performance Features & Benefits
- Smooth Matt Finish
- Easy to clean (Clean with wet cloth)
- Packs available 2 kg, 5 kg, 10 kg, 20 kg
- Surfaces Plastered Walls
- Washability LOW
- Recommended Uses Area Interior
- Post Application Instructions NA
- Finish MATT
- Method of application NA
- Shades available
As per Shade Card
- Other Product Related Features NA
- Precautions Do not apply when the ambient tempratute below 10'c.
Do not apply directely on Lime wash or White cement painted wall
Mixing
Shake well before use
Tools
Brush
Thinning
Water
Thinning Ratio
55-65% by Volume
Surface Preparation
Newly plastered surfaces should be allowed to mature for a minimum period of 6 months before painting.
Drying Time
Surface Dry in 20 Min.
Application Environment
Temperature: 10-40 Degree
Humidity: Below 70%
Cleaning
Remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry.
Filling
Europlus Cement Putty or Acrylic Wall Putty
Safety Features
Non- flammable No added Lead, Mercury or Chromium compounds
Application
Apply one coat of Europrime Cement Primer. After filling up dents with a layer of Europlus Cement Putty, apply another coat of Europrime Cement primer.Apply 2-3 coats of Smart Acrylic Distemper,obtained by thinning 1 kg of distemper with 550-650 ml of water.
| Technical Data | |
|---|---|
| Appearance | Semi Solid |
| Coverage | 1st Coat: 9 - 10 sqm/kg* 2nd Coat: 6 - 7 sqm/kg* |
| Contrast ratio | 98.5 |
| Drying Time | 4-6 hours |
| Flash Point | NA |
| Pot life | 24 hrs |
| Recommended DFT | NA |
| Sheen Level | 2.1 at 60 degree |
| Stability of thinned paint | NA |
| Solids | 66 |
| Specific gravity | 1.64 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 420 psi by Penetrometer |
Application Details & Surface Preparation