Ultimate Super Shield Exterior Emulsion is specially formulated with groundbreaking nanotechnology to give an extremely smooth and dirt resistant finish, which will keep the walls looking new for a very long time. It is based on flexible acrylic emulsion fortified with Silicone polymer, thus giving high UV resistance with increased water repellancy. The paint film bridges micro cracks, and therefore prevents water ingress, providing waterproofing action. It is highly UV resistant, with very powerful anti-algal and anti-fungal properties.It is the only exterior emulsion to offer both dirtproof and waterproofing properties together.
Performance Features & Benefits
- Ultimate Supeshield Exterior Emulsion : Unique nano particle technology
- Water Proof : Excellent film elongation offering ability to bridge hairline cracks, prevents passage of water through such cracks.
- Good water vapour permeability, hence breathable coating with very tight adhesion to masonry.
- High sheen to make your wall have a long lasting glow and elegance.
- Excellent UV ray protection for colour fastness
- Excellent Anti fungal / Anti Algae protection
- Excellent water and Alkali resistance
- Packs available 1 L, 4 L, 10 L, 20 L
- Surfaces Plastered Walls
- Washability HIGH
- Recommended Uses Area Exterior
- Post Application Instructions -
- Finish HIGH SHEEN
- Method of application NA
- Shades available
NA
- Other Product Related Features NA
- Precautions 1. Do not over thin
2. Tinted paint needs to be shaken immediately after tinting
Mixing
Mix well before use (do not shake)
Tools
Brush & Roller
Thinning
Water
Thinning Ratio
upto 40% Volume. For better water proofing, thin max 10%.
Surface Preparation
Seal cracks with a 1:3 mixture of cement and sand. Use of Polymer Putty is highly recommended. For newly plastered surfaces allow 3 months prior curing. Apply one coat of Exterior Wall Primer, obtained by thinning 1 litre of primer with 1 litre of water
Drying Time
Surface Dry in 30 Min.
Application Environment
Temperature: 10-40 Degree Humidity: Below 70%
Cleaning
Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation. Use Biowash to remove hard to remove algae/fungus.
Filling
Europlus Putty or Acrylic Wall Putty
Safety Features
Non- flammable No added Lead, Mercury or Chromium compounds
Application
Apply 2 coats of Ultimate Supershield Exterior Emulsion, obtained by thinning 11 of paint with 400 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc. Apply with brush, roller or spray keeping 4-6 hours interval between coats.
| Technical Data | |
|---|---|
| Appearance | Liquid |
| Coverage | 1 Coat: 10 - 15 sqm/L * 2 Coat: 8 - 10 sqm/L* |
| Contrast ratio | 98 |
| Drying Time | 4-6 hours |
| Flash Point | NA |
| Pot life | NA |
| Recommended DFT | NA |
| Sheen Level | 15 at 60 deg |
| Stability of thinned paint | 24 Hrs |
| Solids | 55 |
| Specific gravity | 1.3 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 1700 CP |
Application Details & Surface Preparation