ZEDPLUS EXTERIOR EMULSION is a water based exterior emulsion for wall finish suitable for dry to moderately humid climatic conditions. ZEDPLUS EXTERIOR EMULSION offers excellent resistance to chalking, cracking and weathering in comparison to cement paint. ZEDPLUS EXTERIOR EMULSION gives cleaner shades which do not fade and last longer. It offers good anti-algal performance in dry to moderately humid climatic conditions. It is available in 1 It., 4 It., 10 It. & 20 lt. packing.
Performance Features & Benefits
- Anti-algal
- Excellent resistance to chalking, cracking and weathering in comparison to cement paint.
- It gives neat and clean shades
- Non Fading shades
- Packs available 1L , 4L , 1OL , 20L
- Surfaces Concrete, Walls and Masonary Surface
- Washability High
- Recommended Uses Area Exterior
- Post Application Instructions For best performance, ensure proper washing and cleaning of all algal and fungal growth if any, at the regular interval of six months.
- Finish MATT
- Method of application NA
- Shades available
As per Shade Card & GR Coatings Fandeck
- Other Product Related Features NA
- Precautions 1. Do not apply in rainy season, apply only on properly dry surface
2. Tinted paint needs to be shaken immediately after tinting
Mixing
Shake well before use
Tools
Brush, Roller & Spray
Thinning
Water
Thinning Ratio
65-75% by Volume
Surface Preparation
Seal cracks with a 1:3 mixture of cement and sand. Use of Cement Putty is highly recommended. Allow 3 months curing prior to painting for newly plastered surfaces. Freshly plastered surfaces require a self-priming coat, obtained by thinning 1L of paint with 1L of water.
Drying Time
Surface Dry in 30 Min.
Application Environment
Temperature: 10-40 Degree
Humidity: Below 80%
Cleaning
Clean the surface of loose paint, dust and grease. Scrub vigorously with wire brush to remove algae, fungus and moss growth, especially on horizontal surfaces prone to water stagnation.
Filling
Cement Putty & Acrylic Wall Putty
Safety Features
Non- flammable
Application
Apply 2 coats of Zedplus Exterio Emulsion, obtained by thinning L1 of emulsion with 650-700 ml of water. 3 Coats are recommended for horizontal surfaces like ledges, sun-shades, etc.
| Technical Data | |
|---|---|
| Appearance | Smooth, Liquid, White |
| Coverage | 1 Coat: 9 - 11 sqm/L* 2 Coat: 8 - 10 sqm/L* |
| Contrast ratio | 98.5 |
| Drying Time | 4-5 Hrs |
| Flash Point | NA |
| Pot life | 24 hrs |
| Recommended DFT | NA |
| Sheen Level | 2.2 at 60 degree |
| Stability of thinned paint | 24 Hrs |
| Solids | 61 |
| Specific gravity | 1.3 to 1.49 |
| Shelf life | 24 months |
| Viscosity @25° C by Stormer Viscometer | 2100 cp |
Application Details & Surface Preparation